Information on features, applications and available colors for “Speckled” polycarbonate. Teijin proposes a new environmentally friendly appearance
Teijin’s transparent polycarbonate is certified ISO10993 for biocompatibility. Introducing solutions for medical applications.
Environmentally friendly grade made without any halogen-based flame retardants, and it expected to be used in medical applications.
Teijin’s low VOC grade developed to improve cabin comfort.
Less creaking noise grade that reduces the creaking noise generated from parts due to vehicle vibration and has the characteristics required for interior parts.
Teijin’s in-vehicle sensor grade is developed to realize a sustainable mobility society by combining weight reduction and efficiency.
Teijin’s high surface hardness materials, low gas and low deposit materials meet the diversified demands of in-vehicle displays.
Mobility and Electric Vehicles (EV). Teijin contributes to the expansion of charging infrastructure. We provide materials that can withstand tough environments.
Due to increased communication volume and faster processing speeds, the amount of heat generated by electronic components tend to increas in next-generation cmmunication equipment.Introducing the thermal conductivity garde developed by Teijin.
Low dielectric grade developed by Teijin for stabilizing radio waves in the 5G communication band.
Material with excellent low-temparature impact resistance and UV resistance, developed for the exterior of applications installed in harsher outdoor environments.
Non-brominated flame resistance materials with high flowability during molding while maintaining high level of impact resistance , ideal for communication equipment housing, etc.
Special polycarbonate for optical lens with high refractive index and low birefringence that contributes to smaller, thinner, and higher performance cameras.
SP grade enables lens unit design over a wide operating temperature range. Introducing the performance comparison and features of SP grade for in-vehicle cameras.
Introducing the features, performance, basic physical properties, and applications of carbon fiber reinforced Teonex®
PEN resin has excellent chemical resistance and gas barrier properties and is a transparent resin use in medical applications.
Pre-hard coated decorative film, for injection molding that has excellent thermoformability and chemical resistance.
A high-quality polycarbonate film produced in clean facility. Optical isotropic and retardation lineups are available.
Cyclic carbodiimides is used as heat-resistance improver for thermosetting resins such as epoxy resins, adhesives, and encapsulants.
By re-evaluating the melt viscosity behavior of the resin, we have developed a polycarbonate resin that exhibits excellent foam molding properties.
Teijin has successfully developed polycarbonate resin that has strong bonding properties with metal.
It is a material that excels in strength and thermal insulation conductivity, making it suitable for various electrical and electronic components.
Polycarbonate resin whose raw materials are replaced with derived materials such as waste vegetable oil.GHG emissions can be reduced by applying the mass balance method.
Polycarbonate resin made from high-quality post-consumer recycled materials.
Polycarbonate resin mixed with other resins, fillers, and additives through compounding. New characteristics and functions will be added.