Polycarbonate Resin Panlite® Sheet & Film

Hard-coated grades

HUD dust cover sheet

Grade

PC-813A、PC-8H30

Characteristics

Panlite®MR sheets, PC-813A (Single-sided MR) and PC-8H30 (High-retardation, one-sided MR) are polycarbonate sheets optimized for HUD dust-cover.

  • Surface hardness

    Achieve much higher surface hardness compared to conventional hard-coated products.

  • Transparency

    Achieve high transparency suitable for displays.

  • Durability

    Retains performance even if left under high temperature and high humidity for long period.

  • Chemical resistance

    Achieve superior chemical resistance.

Lineup

Based on the current product PC-813A, adding retardation and both side hard coating are available.

Physical Properties

Property Unit Test method Measurement conditions PC-813A PC-8H30
(High retardation)
PC-1151
(Reference)
0.35mm 0.38mm 0.38mm
Total light transmittance % ISO 13468-1 - 91.9 91.9 90.1
Haze % ISO 147782 - 0.1 0.1 0.1
Retardation (Re) nm Parallel nicol spectroscopy High retardation measurement - 3,000< -
Pencil hardness - ISO 15184 7.4N B~HB B~HB 2B
Taber hardness(△Haze) % Taber abrasion test Wear wheel CS-10F
4.9N 500spins
5 5 25
Flammability - FMVSS No.302 - PASS PASS PASS
Water contact angle degree ISO 19403 Court side 81 81 84
Surface resistivity Ω/sq. JIS K 6911 - >1016 >1016 >1015
  • *The values in the above table are measured, not guaranteed values.

Heat bendable pre-hard coated sheet

Glade

PC-710A

Characteristics

  • Heat forming

    Achieves superior heat forming, and applicable to exquisitely designed shapes

  • Surface hardness

    High surface hardness prevents damage during handling and forming

  • Weather resistance

    High weather resistance (certified according to the FMVSS standard AS:6/7 M number: 131A DOT280)

Available thickness

2.0mm~5.0mm

Physical Properties

Property Unit Test method Measurement conditions PC-710A
Total light transmittance % ISO 13468-1 4mm thick 89.1
Haze % ISO 147782 4mm thick 0.1
Pencil hardness - ISO 15184 7.4N B~HB
Taber hardness(△Haze) % Taber abrasion test Wear wheel CS-10F
4.9N 100spins
6.6
Steel wool hardness - In House method
(PC:1~glass:5)
100gf 5 round trips 2~3
  • *The values in the above table are measured, not guaranteed values.

Multi Layer and hard coat sheet

Grade

PC-HA51, PC-JA53

Characteristics

  • Surface hardness

    Using a coextruded sheet of PC resin (impact resistance) and PMMA resin (surface hardness) as base material, the products has extremely high surface hardness while maintaining impact resistance compared to conventional hard-coated PC resin sheets.

  • Transparency

    Achieve high transparency suitable for display covers.

Available thickness

0.5~2.0mm

  • *Please contact us for sizes.